Mathwords logoMathwords

Babylonian Number System — Definition, Formula & Example

The Babylonian number system is a way of writing numbers that people in ancient Mesopotamia used about 4,000 years ago. It counts in groups of 60 instead of groups of 10, and it builds every number from just two wedge-shaped marks pressed into clay.

The Babylonian system is a positional numeral system with base 60 (sexagesimal). Each place holds a sexagesimal digit from 1 to 59, and an empty place is read as 0. Each digit is written additively in cuneiform with up to five corner wedges (each worth 10) and up to nine vertical wedges (each worth 1). The place values are powers of 60. The early system had no symbol for zero and no mark like a decimal point, so readers had to work out the scale from context. A placeholder sign for an empty place appeared only in later centuries.

Key Formula

N=dk⋅60k+⋯+d2⋅602+d1⋅60+d0N = d_k \cdot 60^k + \cdots + d_2 \cdot 60^2 + d_1 \cdot 60 + d_0
Where:
  • NN = the value of the whole number in base 10
  • did_i = the sexagesimal digit in place i, from 1 to 59 written with wedges; an empty place is read as 0
  • 60i60^i = the place value of position i, counting from 0 on the right

Worked Example

Problem: A clay tablet shows a whole number written in three groups of wedges, from left to right: 1 vertical wedge; 6 vertical wedges; 4 corner wedges. What is its value in base 10?
Step 1: Read each group as one sexagesimal digit. A vertical wedge is worth 1 and a corner wedge is worth 10.
164×10=401 \qquad 6 \qquad 4 \times 10 = 40
Step 2: Multiply each digit by its place value. From right to left, the place values are 600=160^0 = 1, 601=6060^1 = 60, and 602=360060^2 = 3600.
1⋅3600=3600,6⋅60=360,40⋅1=401 \cdot 3600 = 3600, \quad 6 \cdot 60 = 360, \quad 40 \cdot 1 = 40
Step 3: Add the three results.
3600+360+40=40003600 + 360 + 40 = 4000
Answer: The tablet shows the number 4,000.

Why It Matters

You still use base 60 every day. An hour has 60 minutes, a minute has 60 seconds, and a full circle has 360 degrees, and all of these trace back to Babylonian astronomy. The number 60 has 12 divisors, so many fractions such as one-third, one-quarter, and one-fifth come out as whole numbers of sixtieths. That made division easier for Babylonian scribes.

Common Mistakes

Mistake: Reading the digit groups as if they were base-10 digits, so 1, 6, 40 becomes 1,640.
Correction: Each group is a full digit from 1 to 59 (an empty place is read as 0), and each place is worth 60 times the place to its right. Multiply by powers of 60 and then add, which gives 4,000.

Related Terms

  • Hindu-Arabic Number System — Base-10 place-value system we use today, for comparison
  • Digit — Babylonian digits run from 1 to 59, with an empty place read as 0
  • Natural Numbers — The counting numbers Babylonians recorded on tablets
  • Place Value — Babylonian numerals rely on position to determine value
  • Decimal — Base-10 fractional notation contrasted with base-60 system
  • Positional Notation — Base-60 numerals are one kind of positional notation
  • Converting Bases — How to rewrite a base-60 number in base 10