Slide Rule — Definition, Formula & Example
A slide rule is a mechanical calculating tool made of rulers that slide against each other. Engineers and scientists used it to multiply and divide quickly until electronic calculators replaced it in the 1970s.
A slide rule is an analog computing device whose scales place each number at a distance from the starting mark (the index) proportional to . Sliding one scale along another adds or subtracts these distances. By the logarithm laws and , this addition or subtraction gives a product or quotient.
Key Formula
Where:
- = First positive number being multiplied
- = Second positive number being multiplied
- = Base-10 logarithm. On a slide rule it sets each number's distance from the index.
Worked Example
Problem: A slide rule has a scale 10 inches long, so the number is marked inches from the index. Show how sliding the scales computes .
Step 1: Find where 2 and 3 sit on the scale. Each distance equals 10 times the base-10 logarithm.
Step 2: Slide the upper scale so its index lines up with 2 on the lower scale. Then look under 3 on the upper scale. The two lengths now lie end to end, so their distances add.
Step 3: Read the lower scale at 7.78 in.. That mark is the number whose position is 7.78 in..
Answer: The lower scale reads 6, so . Adding two lengths carried out the multiplication.
Why It Matters
The slide rule is a physical model of the logarithm property you learn in Algebra 2 and Precalculus: multiplying numbers corresponds to adding their logarithms. The same logarithmic spacing shows up in the decibel scale, the pH scale, and log-scale graphs in science courses.
Common Mistakes
Mistake: Treating the reading on the scale as the complete answer, for example reading 6 for .
Correction: A slide rule shows only the significant digits, usually about 3 of them. It does not track the decimal point. Estimate the size of the answer yourself: is in the hundreds, so the reading 6 means 600.
