Regiomontanus' Angle Maximization Problem — Formula & Example
Regiomontanus' angle maximization problem asks where you should stand so that a picture or screen hanging above your eye level fills the largest possible angle of your view. Standing too close or too far both make that angle smaller, so the best spot lies somewhere in between.
Let the bottom and top edges of an object lie at heights and () above the horizontal line through the observer's eye. Let be the observer's horizontal distance from the wall. The viewing angle is . The problem is to find the that maximizes . The unique maximizer is . Geometrically, this is the point where a circle through the two edges is tangent to the eye-level line. The power-of-a-point theorem then gives . The German astronomer Regiomontanus posed the problem in 1471, and it is often cited as the first new extreme-value problem posed since antiquity.
Key Formula
Where:
- = Horizontal distance from the wall that gives the largest viewing angle
- = Height of the object's bottom edge above your eye level
- = Height of the object's top edge above your eye level
- = The largest possible viewing angle
Worked Example
Problem: A movie screen's bottom edge is 4 ft above your eye level, and its top edge is 9 ft above your eye level. How far from the wall should you sit to get the largest viewing angle, and what is that angle?
Step 1: Write the viewing angle as the difference of two angles measured from eye level. Let be your distance from the wall in feet.
Step 2: Differentiate and set the derivative equal to 0. Cross-multiplying gives , so and , since a distance must be positive. The derivative is positive for and negative for , so gives a maximum.
Step 3: Find the maximum angle. Use the tangent subtraction formula with .
Answer: Sit 6 ft from the wall. This matches . The largest viewing angle is .
Why It Matters
The same setup tells a soccer player where to shoot from along a line to see the widest goal angle. It also helps designers place seating in theaters and museums. In AP Calculus, it is a standard optimization problem that combines inverse trig derivatives with the first derivative test.
Common Mistakes
Mistake: Measuring the heights of the object from the floor instead of from your eye level.
Correction: The angles are measured from the horizontal line through your eye. Subtract your eye height from each edge height first. For example, edges at 9 ft and 14 ft above the floor become and for a 5 ft eye height.
