Mathwords logoMathwords

Inverse-Square Law — Definition, Formula & Example

The inverse-square law is a rule stating that a quantity, such as light brightness or gravitational pull, is inversely proportional to the square of the distance from its source. If you double the distance, you get one-fourth as much. If you triple it, you get one-ninth.

A quantity II obeys an inverse-square law in the distance dd if I=kd2I = \dfrac{k}{d^2} for some constant k>0k > 0 and all d>0d > 0. Equivalently, the product Id2I d^2 is constant. For a point source that emits power PP evenly in all directions, the power spreads over a sphere of area 4πd24\pi d^2. This gives k=P4πk = \dfrac{P}{4\pi}. Newton's law of gravitation, F=Gm1m2d2F = \dfrac{G m_1 m_2}{d^2}, and Coulomb's law have this form. Motion under an inverse-square force follows a conic-section path: an ellipse, a parabola, or a hyperbola.

Key Formula

I=kd2⟺I2I1=(d1d2)2I = \frac{k}{d^2} \qquad\Longleftrightarrow\qquad \frac{I_2}{I_1} = \left(\frac{d_1}{d_2}\right)^2
Where:
  • II = The quantity that weakens with distance, such as intensity, illuminance, or force
  • kk = The constant of proportionality, set by the strength of the source
  • dd = The distance from the source (d>0d > 0)
  • I1,I2I_1, I_2 = The values of the quantity at distances d1d_1 and d2d_2

Worked Example

Problem: A lamp produces an illuminance of 36 foot-candles at a distance of 2 feet. Treat the lamp as a point source. What is the illuminance 6 feet from the lamp?
Step 1: Find the constant kk. Multiply the known illuminance by the square of its distance.
k=Id2=36⋅22=144k = I d^2 = 36 \cdot 2^2 = 144
Step 2: Substitute d=6d = 6 into the inverse-square formula.
I=14462=14436=4I = \frac{144}{6^2} = \frac{144}{36} = 4
Step 3: Check the result with the ratio form. The distance tripled, so the illuminance should drop by a factor of 32=93^2 = 9.
369=4\frac{36}{9} = 4
Answer: The illuminance 6 feet from the lamp is 4 foot-candles.

Visualization

Why It Matters

In physics courses, the inverse-square law describes how gravity (Newton's law of gravitation) and electric force (Coulomb's law) weaken with distance. It also explains why planets move in elliptical orbits. Photographers, radiation-safety technicians, and audio engineers use it too: moving twice as far from a flash, an X-ray source, or a speaker cuts the intensity to one-quarter.

Common Mistakes

Mistake: Treating the law as ordinary inverse variation. Tripling the distance from a 36 foot-candle lamp then gives 36 ÷ 3 = 12 foot-candles.
Correction: The distance is squared, so you divide by the square of the distance factor. Tripling the distance divides by 3² = 9, which gives 36 ÷ 9 = 4 foot-candles.

Related Terms