Mathwords logoMathwords

Inverse Laplace Transform — Definition, Formula & Example

The inverse Laplace transform is the operation that takes a function F(s)F(s) in the ss-domain and gives back the time function f(t)f(t) whose Laplace transform is F(s)F(s). You use it as the last step when you solve a differential equation with Laplace transforms.

If F(s)=L{f(t)}F(s) = \mathcal{L}\{f(t)\}, then f(t)=L−1{F(s)}f(t) = \mathcal{L}^{-1}\{F(s)\} for t≥0t \ge 0. The operator L−1\mathcal{L}^{-1} is linear: L−1{aF+bG}=a L−1{F}+b L−1{G}\mathcal{L}^{-1}\{aF + bG\} = a\,\mathcal{L}^{-1}\{F\} + b\,\mathcal{L}^{-1}\{G\}. By Lerch's theorem, two continuous functions with the same Laplace transform are equal for all t≥0t \ge 0, so the inverse is unique among continuous functions. Analytically, f(t)f(t) is given by the Bromwich contour integral below.

Key Formula

f(t)=L−1{F(s)}=12πi∫γ−i∞γ+i∞est F(s) dsf(t) = \mathcal{L}^{-1}\{F(s)\} = \frac{1}{2\pi i}\int_{\gamma - i\infty}^{\gamma + i\infty} e^{st}\,F(s)\,ds
Where:
  • F(s)F(s) = The given function of the complex variable s
  • f(t)f(t) = The recovered function of time, defined for t ≥ 0
  • γ\gamma = A real number greater than the real part of every singularity of F(s)
  • ii = The imaginary unit, with i² = −1

How It Works

In practice you rarely evaluate the integral. Instead, you rewrite F(s)F(s) as a sum of standard forms, often with partial fractions, and read each piece backward from a table. Key pairs (F(s)→f(t)F(s) \to f(t)): 1s→1\frac{1}{s} \to 1, 1s−a→eat\frac{1}{s-a} \to e^{at}, n!sn+1→tn\frac{n!}{s^{n+1}} \to t^n, ks2+k2→sin⁡kt\frac{k}{s^2+k^2} \to \sin kt, ss2+k2→cos⁡kt\frac{s}{s^2+k^2} \to \cos kt. Linearity lets you pull constants out and invert term by term.

Worked Example

Problem: Find L−1{2s+8(s+1)(s+3)}\mathcal{L}^{-1}\left\{\dfrac{2s + 8}{(s+1)(s+3)}\right\}.
Step 1: The denominator has two distinct linear factors, so set up a partial fraction decomposition.
2s+8(s+1)(s+3)=As+1+Bs+3\frac{2s+8}{(s+1)(s+3)} = \frac{A}{s+1} + \frac{B}{s+3}
Step 2: Multiply both sides by (s+1)(s+3)(s+1)(s+3) to get 2s+8=A(s+3)+B(s+1)2s + 8 = A(s+3) + B(s+1). Substitute s=−1s = -1 to find AA, then s=−3s = -3 to find BB.
A=2(−1)+8−1+3=3,B=2(−3)+8−3+1=−1A = \frac{2(-1)+8}{-1+3} = 3, \qquad B = \frac{2(-3)+8}{-3+1} = -1
Step 3: Use linearity and the table pair L−1{1s−a}=eat\mathcal{L}^{-1}\left\{\frac{1}{s-a}\right\} = e^{at}, with a=−1a = -1 and a=−3a = -3.
L−1{3s+1−1s+3}=3e−t−e−3t\mathcal{L}^{-1}\left\{\frac{3}{s+1} - \frac{1}{s+3}\right\} = 3e^{-t} - e^{-3t}
Answer: f(t)=3e−t−e−3tf(t) = 3e^{-t} - e^{-3t} for t≥0t \ge 0.

Why It Matters

In a first differential equations course, Laplace methods turn an initial value problem into algebra in ss. The inverse transform is the step that turns that algebra back into the solution y(t)y(t). Electrical engineers use the same step to find circuit responses from transfer functions in control systems and signal analysis.

Common Mistakes

Mistake: Reading 1s2+9\dfrac{1}{s^2+9} straight off the table as sin⁡3t\sin 3t.
Correction: The table pair is ks2+k2→sin⁡kt\frac{k}{s^2+k^2} \to \sin kt, so the numerator must equal k=3k = 3. Write 1s2+9=13⋅3s2+9\frac{1}{s^2+9} = \frac{1}{3}\cdot\frac{3}{s^2+9}. The inverse is 13sin⁡3t\frac{1}{3}\sin 3t.

Related Terms