Mathwords logoMathwords

Hill Equation — Definition, Formula & Example

The Hill equation is a formula from biochemistry that predicts what fraction of a protein's binding sites hold a molecule (a ligand) at a given ligand concentration. Its exponent, the Hill coefficient, measures how strongly binding at one site helps or hinders binding at the others.

For ligand concentration [L]≥0[L] \ge 0, the fractional saturation is θ=[L]nKA n+[L]n\theta = \dfrac{[L]^n}{K_A^{\,n} + [L]^n}, where KA>0K_A > 0 is the concentration at which θ=12\theta = \tfrac{1}{2} and n>0n > 0 is the Hill coefficient. Equivalently, θ1−θ=([L]KA)n\dfrac{\theta}{1-\theta} = \left(\dfrac{[L]}{K_A}\right)^n. A plot of log⁡θ1−θ\log\dfrac{\theta}{1-\theta} against log⁡[L]\log[L] is therefore a straight line with slope nn. Binding is positively cooperative if n>1n > 1, noncooperative if n=1n = 1, and negatively cooperative if n<1n < 1.

Key Formula

θ=[L]nKA n+[L]n\theta = \frac{[L]^n}{K_A^{\,n} + [L]^n}
Where:
  • θ\theta = Fractional saturation: the fraction of binding sites occupied, from 0 to 1
  • [L][L] = Concentration of free ligand, usually in micromolar (μM, millionths of a mole per liter)
  • KAK_A = Ligand concentration that fills half the sites, in the same units as [L]
  • nn = Hill coefficient, which measures cooperativity and controls how steep the curve is

Worked Example

Problem: Concentrations here are in micromolar (μM), the usual metric unit in biochemistry. A protein has KA=10K_A = 10 μM and Hill coefficient n=2n = 2. What fraction of its sites are filled when [L]=20[L] = 20 μM? Compare it with a noncooperative protein (n=1n = 1) that has the same KAK_A.
Step 1: Substitute [L]=20[L] = 20, KA=10K_A = 10, and n=2n = 2 into the Hill equation.
θ=202102+202=400100+400=400500=0.8\theta = \frac{20^2}{10^2 + 20^2} = \frac{400}{100 + 400} = \frac{400}{500} = 0.8
Step 2: Repeat with n=1n = 1. At the same 20 μM, the noncooperative protein fills fewer sites than the cooperative one.
θ=2010+20=2030=23≈0.667\theta = \frac{20}{10 + 20} = \frac{20}{30} = \frac{2}{3} \approx 0.667
Step 3: Check the n=2n = 2 result with the ratio form. Doubling [L][L] relative to KAK_A multiplies the occupied-to-empty ratio by 2n2^n. On a log scale, this shows up as slope nn.
0.81−0.8=0.80.2=4=(2010)2\frac{0.8}{1 - 0.8} = \frac{0.8}{0.2} = 4 = \left(\frac{20}{10}\right)^2
Answer: With n=2n = 2, 80% of the sites are filled at 20 μM. With n=1n = 1, only about 66.7% are filled.

Why It Matters

In college biochemistry, you use the Hill equation to explain the S-shaped oxygen-binding curve of hemoglobin. Pharmacologists fit it to dose-response data to estimate a drug's potency and how steep its response is. In systems biology, it is the standard model for genes that switch on sharply once a regulator passes a threshold.

Common Mistakes

Mistake: Treating the Hill coefficient nn as the number of binding sites.
Correction: The Hill coefficient is an empirical measure of cooperativity and is not a count of sites. Hemoglobin has four oxygen-binding sites, but its measured Hill coefficient is about 2.8 to 3. The number of sites is an upper limit: nn cannot exceed it.

Related Terms

  • Algebraic Equation — Becomes an algebraic (rational) equation in L when n is a whole number
  • Exponent Rules — Rewrites the ratio form as a single power
  • Common Logarithm — Linearizes the equation into a Hill plot
  • Fraction — Output is the fraction of binding sites occupied
  • Exponent — The Hill coefficient is an exponent in the formula