Mathwords logoMathwords

Damped Harmonic Motion — Definition, Formula & Example

Damped harmonic motion is the motion of a spring or similar system in which friction or resistance slowly drains energy. The object either oscillates with shrinking swings or returns to rest without oscillating.

A system undergoes damped harmonic motion when its displacement x(t)x(t) satisfies the linear, constant-coefficient, second-order ODE mx′′+cx′+kx=0mx'' + cx' + kx = 0, where the mass m>0m > 0, the damping coefficient c>0c > 0, and the spring constant k>0k > 0. The sign of the discriminant c2−4mkc^2 - 4mk of the characteristic equation mr2+cr+k=0mr^2 + cr + k = 0 determines which form the solution takes.

Key Formula

md2xdt2+cdxdt+kx=0m\frac{d^2x}{dt^2} + c\frac{dx}{dt} + kx = 0
Where:
  • x(t)x(t) = Displacement from equilibrium at time t (feet)
  • mm = Mass of the object (slugs, the US customary unit of mass, equal to weight in pounds divided by g ≈ 32 ft/s²)
  • cc = Damping coefficient, the resistance per unit velocity (lb·s/ft)
  • kk = Spring constant (lb/ft)

How It Works

Solve the characteristic equation mr2+cr+k=0mr^2 + cr + k = 0 and check the sign of c2−4mkc^2 - 4mk. If c2−4mk>0c^2 - 4mk > 0, the system is overdamped. There are two distinct negative real roots, and x=C1er1t+C2er2tx = C_1 e^{r_1 t} + C_2 e^{r_2 t}. If c2−4mk=0c^2 - 4mk = 0, the system is critically damped, and x=(C1+C2t)e−ct/(2m)x = (C_1 + C_2 t)e^{-ct/(2m)}. If c2−4mk<0c^2 - 4mk < 0, the system is underdamped, and x=eαt(C1cos⁡βt+C2sin⁡βt)x = e^{\alpha t}(C_1\cos\beta t + C_2\sin\beta t), where α=−c2m\alpha = -\frac{c}{2m} and β=4mk−c22m\beta = \frac{\sqrt{4mk - c^2}}{2m}. Only the underdamped case oscillates. In every case, x(t)→0x(t) \to 0 as t→∞t \to \infty.

Worked Example

Problem: A 1-slug mass hangs on a spring with k=26k = 26 lb/ft. A damper supplies c=2c = 2 lb·s/ft. You pull the mass 1 ft below equilibrium and release it from rest, so x(0)=1x(0) = 1 and x′(0)=0x'(0) = 0. Find x(t)x(t) and describe the motion.
Step 1: Write the characteristic equation and classify the damping with the discriminant. It is negative, so the system is underdamped.
r2+2r+26=0,c2−4mk=22−4(1)(26)=−100<0r^2 + 2r + 26 = 0, \qquad c^2 - 4mk = 2^2 - 4(1)(26) = -100 < 0
Step 2: Find the complex roots. They give α=−1\alpha = -1 and β=5\beta = 5, so you can write the general solution.
r=−2±−1002=−1±5i⟹x(t)=e−t(C1cos⁡5t+C2sin⁡5t)r = \frac{-2 \pm \sqrt{-100}}{2} = -1 \pm 5i \quad\Longrightarrow\quad x(t) = e^{-t}(C_1\cos 5t + C_2\sin 5t)
Step 3: Apply the initial conditions. The condition x(0)=1x(0) = 1 gives C1=1C_1 = 1. Differentiating gives x′(0)=−C1+5C2x'(0) = -C_1 + 5C_2, so x′(0)=0x'(0) = 0 requires C2=15C_2 = \tfrac{1}{5}.
x(t)=e−t(cos⁡5t+15sin⁡5t)x(t) = e^{-t}\left(\cos 5t + \tfrac{1}{5}\sin 5t\right)
Answer: The displacement is x(t)=e−t(cos⁡5t+15sin⁡5t)x(t) = e^{-t}\left(\cos 5t + \tfrac{1}{5}\sin 5t\right) ft. The mass oscillates with quasi-period 2π5≈1.26\frac{2\pi}{5} \approx 1.26 s, and the factor e−te^{-t} shrinks its swings toward 0.

Why It Matters

This model is the core application in the second-order linear ODE unit of a college differential equations course. Mechanical engineers use it to tune car shock absorbers and door closers, often aiming for near-critical damping. Electrical engineers use the same equation for RLC circuits, with LL, RR, and 1/C1/C in the roles of mm, cc, and kk.

Common Mistakes

Mistake: Using the undamped natural frequency k/m\sqrt{k/m} as the oscillation frequency of an underdamped system.
Correction: Damping slows the oscillation. The quasi-frequency is β=4mk−c2/(2m)\beta = \sqrt{4mk - c^2}/(2m). In the example above, 26≈5.10\sqrt{26} \approx 5.10 rad/s is the undamped value, but the mass actually oscillates at β=5\beta = 5 rad/s.

Related Terms