Mathwords logoMathwords

Braking Distance — Definition, Formula & Example

Braking distance is how far a vehicle keeps moving after the driver presses the brakes, until it comes to a complete stop. It grows much faster than speed does: go twice as fast and you need four times as much room to stop.

For a vehicle with initial speed vv and constant deceleration a>0a > 0, the braking distance is d=v22ad = \dfrac{v^2}{2a}. This follows from the kinematic equation vf2=v2−2adv_f^2 = v^2 - 2ad with final speed vf=0v_f = 0. Because dd is proportional to v2v^2, braking distance is a quadratic function of speed, not a linear one.

Key Formula

d=v22ad = \frac{v^2}{2a}
Where:
  • dd = braking distance (feet, or meters in SI units)
  • vv = speed when the brakes are applied (feet per second, or meters per second); convert mph to ft/s first
  • aa = magnitude of the constant deceleration (feet per second squared, or meters per second squared), which depends on the brakes, tires and road surface

Worked Example

Problem: A car traveling at 30 mph brakes with a constant deceleration of 16 ft/s² (about 4.9 m/s²). Find its braking distance. Then find the braking distance if the car were going twice as fast, at 60 mph.
Step 1: Convert the speed to feet per second. One mile per hour is 52803600=2215\frac{5280}{3600} = \frac{22}{15} ft/s.
30×2215=44 ft/s,60×2215=88 ft/s30 \times \frac{22}{15} = 44 \text{ ft/s}, \qquad 60 \times \frac{22}{15} = 88 \text{ ft/s}
Step 2: Substitute v=44v = 44 and a=16a = 16 into the formula.
d=4422(16)=193632=60.5 ftd = \frac{44^2}{2(16)} = \frac{1936}{32} = 60.5 \text{ ft}
Step 3: Repeat with the doubled speed v=88v = 88. The deceleration stays the same.
d=8822(16)=774432=242 ftd = \frac{88^2}{2(16)} = \frac{7744}{32} = 242 \text{ ft}
Step 4: Compare the two distances. Doubling the speed multiplies the braking distance by 22=42^2 = 4.
24260.5=4\frac{242}{60.5} = 4
Answer: The braking distance is 60.5 ft (about 18.4 m) at 30 mph and 242 ft (about 73.8 m) at 60 mph, four times as far.

Why It Matters

Driver's education courses and physics kinematics units use braking distance to show why small increases in speed are dangerous. Traffic engineers use the same quadratic model to set safe stopping sight distances on curves and hills. In algebra, it is a standard example of data that a straight line fits poorly.

Common Mistakes

Mistake: Assuming braking distance is proportional to speed, so that doubling the speed doubles the distance.
Correction: Speed is squared in the formula. Doubling vv multiplies dd by 4, and tripling vv multiplies dd by 9. Total stopping distance adds a reaction distance vtvt, which is linear, but the braking part is quadratic.

Related Terms

  • Linear — Braking distance is a nonlinear counterexample
  • Quadratic Function — Braking distance is modeled by a quadratic function of speed
  • Proportional — Distance is proportional to speed squared, not speed
  • Speed — Braking distance grows with the square of speed
  • Acceleration — Steady deceleration sets how far a car travels